LED LENSER Colour Filter Set 37mm | P7 P7R T7M M7R H14R.2 | Roll Protection and 4filters

Colour Filter Set 37mm | P7 P7R T7M M7R H14R.2- includes red, green, yellow and blue interchangeable coloured glass filters lenses.

It is compatible with the Ledlenser P7, P7.2, P7R, T7, T7.2, T7M, M7R, M7, L7, H14, and H14R. Also suitable for other torch models with a head diameter of 37 mm.

Packaging and Contents

Supplied in retail box and includes:
Rubber lens holder x 1
Red filter lens x 1
Green filter lens x 1
Yellow filter lens x 1
Blue filter lens x 1

This Ledlenser filter set includes red, green, yellow and blue interchangeable coloured glass filters lenses.

It is compatible with the Ledlenser P7, P7.2, P7R, T7, T7.2, T7M, M7R, M7, L7, H14, and H14R. Also suitable for other torch models with a head diameter of 37 mm.

The four filters are red for preserving night vision, green for observing wildlife, blue for tracking and yellow for better visibility in fog, amongst other uses. All filters feature anti-reflective coating to ensure maximum available light passes through.

There is only one filter housing included, so to change the filter colour the glass lens colour has to be swapped out, which instructions can be found below.

Fitting the Lenses

The rubber holder that houses the glass lenses used to be quite hard, however this has been updated and the housing is now slightly less rigid making it easier to put the lenses in as the rubber has more bend to it. We recommend inserting one side of the filter first under the ridge section, and then gently pushing the filter into the other side, bending the housing to fit around it if need be. Please note the lenses can potentially break if too much force is applied as they are made from glass, so care should be taken when fitting them.